Focus on multiple fields, fibre-optic laser cutters, carving machines, sculptors, carvings.
The maintenance of the general hood is divided into five areas:
1. Clean appearance
Every day before work hours, the staff member turned off the hood after the power went out.
The table, masked dishes are cleaned, water is not available, oil is not available and other non-toxic and volatile cleaning fluids, such as alcohol, are used.
2. Maintenance of transmission systems
The transmission system of the mask includes electrical, gear, speed-reducing, chain, chain, conveyor belt, etc.
Whether objects such as dust are attached to the heat which affects the heat, gears, chains, oils and accessories. Is the chain lax or not?
Alien, is the link screws between the transmissions loose, etc., and does the speed-reducing lubricants work? Usually.
It takes 1,000 hours to replace lubricant once.
Maintenance of electrical systems
Check whether the electrical circuits of the equipment are loose, whether the main power lines, branch lines, etc. are worn, ageing and electrical items are loose? Electrical case
Whether it's clean and dry inside, whether the exhaust fans are working properly, etc.
I'm sorry.
Maintenance of ultrasound systems
(composed of ultrasound exchangers, vibrations, welds, connections)
Check that the ultrasound system is clean, especially ultrasound cells, vibrations (energy exchangers), welding (extension ratio) must be dry and clean
With water, the connection must be solid. The degree of wear of ultrasound welds is often checked. Keep an eye on the voltage and current meters on the ultrasound.
The range of changes in the pointer.
5. Maintenance of gas supply systems
(consisting of gas source filtering systems, tubes, cylinders)
Air filters to check for water? Water, water for air compressors.
The pressurizer drops the water. Check if there's a leak in the pipes? The location of the tank's magnetic sensors and whether they're working properly.
Created:
2020-11-20
Browser:
Collection
Previous:
The last:
The article describes common issues. Exact troubleshooting, parts, adjustments and machine solutions depend on the machine model and actual operating conditions.